Key takeaways
- Protect your palms on the pull-up bar and rings. Compare the best gymnastics grips for karate conditioning — leather, carbon, and no-hole picks.
High-rep pull-up bar and gymnastic rings work builds the grip strength, shoulder stability, and upper-body endurance that carry over into karate training — but it also tears up bare hands. Rips and blisters at the base of the fingers are the usual tax on kipping pull-ups, toes to bar, and long ring sessions, and they cost training days. Gymnastics grips, also called palm guards, are the standard fix: a panel of leather, carbon fiber, or polymer that sits between your palm and the bar, held in place by finger holes and a wrist strap.
One honest note up front: karate itself does not use grips. Kata and kumite are bare-handed, and no bar apparatus is part of karate technique training. The picks below belong to the conditioning side of the sport — the pull-up bar and rings sessions that support karate training, the same cluster as gymnastic rings and pegboards. If your bar work leaves your palms raw, a palm guard keeps you training.
As an Amazon Associate, we earn from qualifying purchases.
How to Choose Gymnastics Grips for Bar and Ring Conditioning
Finger-hole format comes first. A 3-hole grip threads the middle, ring, and index fingers through the panel and covers the most palm, which suits long sets on the bar. A 2-hole grip leaves the index finger free, which gives more wrist mobility and a freer feel when you move between the bar and other movements. A no-hole, or fingerless, grip has no finger loops at all — the panel is held by the wrist strap and your own grip pressure, which makes it the fastest to put on and take off between sets. None of these formats is better in general; the right one depends on how much coverage you want and how much finger freedom you prefer.
Material decides the chalk rule. Leather grips work with chalk — the traditional pairing. Carbon fiber grips hold a slick or powder-coated bar without chalk, and adding chalk does not help them. Isoprene polymer grips stick to the bar dry, and chalk actively reduces their hold. Matching the chalk rule to the material is the most common mistake with palm guards: leather gets chalk, carbon and isoprene do not.
Sizing is measured, not guessed. The standard method is the palm-to-middle-finger measurement: measure from the base of your palm to the base of your middle finger, then match that number to the brand’s own size chart. Every brand cuts differently, so a Large from one maker is not the same as a Large from another, and size charts must never be mixed between brands. If your measurement falls on the line between two sizes, size up — a grip with a little extra material protects more palm than one that comes up short.
Wrist straps and break-in round out the choice. Every pick below has a wrist strap or wrap that anchors the panel and keeps it from sliding during kipping work. Leather grips need a short break-in before they feel molded to your hand; carbon and polymer grips feel consistent from the first session. All five picks are palm guards for bodyweight bar and ring work only — not barbell lifting straps, grip pads, or gloves.
1. Bear KompleX Carbon 3-Hole Hand Grips
The Bear KompleX Carbon 3-Hole is the full-coverage pick in this lineup. Three finger holes spread the panel across the whole palm, and the carbon fiber face is made to hold a slick or powder-coated bar without chalk. That matters on the kind of bar most home setups have: a smooth steel or powder-coated pull-up bar is exactly where bare hands slip and tear, and the patented Carbon Comp surface is designed to grip that finish dry. Wrist wraps anchor the panel so it stays put through kipping sets and toes to bar.
This is the grip to choose if your sessions run long and you want maximum palm coverage with no chalk routine. The 3-hole layout covers more skin than any 2-hole or fingerless design, which is what you want when the limiting factor in a workout is your hands rather than your pulling strength.
Specs
- Format: 3-hole palm panel
- Material: Carbon fiber with patented Carbon Comp grip surface
- Chalk rule: No chalk needed — grips slick and powder-coated bars dry
- Wrist support: Wrist wraps included
- Sizing: Measure base of palm to base of middle finger; match the Bear KompleX size chart
2. Bear KompleX Leather 2-Hole Hand Grips
The leather 2-Hole is the traditionalist’s pick and the most forgiving one here for lifters who move between the bar and the barbell. Two finger holes leave the index finger free, which keeps wrist mobility open and makes the grip easy to flip out of the way between movements. The leather panel protects the palm from rips and blisters through pull-ups, muscle-ups, and ring work, and leather is the one material in this lineup that pairs with chalk.
Leather needs a short break-in before it feels like part of your hand, and it rewards that patience: the panel molds to your palm over the first few sessions and then stays consistent. Wrist straps hold the panel in place without squeezing the wrist.
Specs
- Format: 2-hole palm panel with free index finger
- Material: Leather
- Chalk rule: Chalk OK — leather pairs with chalk
- Wrist support: Wrist straps
- Sizing: Measure base of palm to base of middle finger; match the Bear KompleX size chart
- Break-in: Short break-in period; leather molds to the palm
3. WODFIT Carbon Fingerless Hand Grips, Small
The WODFIT Carbon Fingerless is the no-hole pick, and it is the fastest grip in this lineup to get on and off. With no finger loops to thread, you slide your hand under the wrist strap and go, which suits mixed sessions where you move between the bar, the floor, and the rings. The carbon face holds a slick bar dry, like the Bear KompleX carbon pick, so there is no chalk to manage. This listing is the Small size, cut for smaller hands — check the palm-to-middle-finger measurement against the WODFIT chart before ordering, since a fingerless panel that is too large will bunch under the palm.
A note on the name: WODFIT is its own brand and is not the same company as WOD Nation or WODFitters, two other brands with similar names in the same market.
Specs
- Format: No-hole / fingerless palm panel
- Material: Carbon fiber
- Chalk rule: No chalk needed — grips the bar dry
- Wrist support: Wrist straps
- Size: Small
- Sizing: Measure base of palm to base of middle finger; match the WODFIT size chart
4. JerkFit Raw Grips 3.0, 2-Finger Leather, Large
The JerkFit Raw Grips 3.0 take the 2-finger idea further than any other pick here: they are the first 2-finger leather grip designed to cover the entire hand, with the index finger left free for range of motion. Most 2-finger designs cover only the middle of the palm and leave the edges exposed; the Raw Grips extend the leather to wrap around the wrist comfortably, so the panel covers the full palm without digging in. The leather is soft and broken in out of the package, and it will not bleed color onto your hands.
Each pair includes a strip of sandpaper for customizing the finger holes if one feels tight. The sizing chart is measured the standard way, from the base of the palm to the base of the middle finger: XS up to 3.75 inches, S from 3.75 to 4.25 inches, M from 4.25 to 5.0 inches, and L over 5.0 inches. This listing is the Large, for palms measuring over 5.0 inches; if you fall on the line between sizes, the maker advises sizing up.
Specs
- Format: 2-finger palm panel with free index finger; full palm coverage
- Material: Leather, soft and broken in out of the package
- Chalk rule: Chalk OK — leather pairs with chalk
- Wrist support: Adjustable wrist strap
- Size: Large (palm to middle-finger measurement over 5.0 inches)
- Sizing chart: XS up to 3.75 in; S 3.75–4.25 in; M 4.25–5.0 in; L over 5.0 in
- Extras: Sandpaper strip included for resizing finger holes
5. Element 26 IsoGrip, Medium, IsoComp
The Element 26 IsoGrip is the most specialized pick in this lineup and the thinnest: a 1.2 mm panel of proprietary isoprene polymer, sold here in the Medium size with the IsoComp compound. The polymer sticks to the bar on its own, with no chalk at all — and this is the one grip where chalk is not merely unnecessary but counterproductive, because chalk reduces the polymer’s hold. If you train on a bar where chalk is banned or you simply want a dry-grip option, the IsoGrip is built for exactly that.
The design offers finger-loop or no-loop options, so you can wear it as a looped guard or as a fingerless panel depending on the session, and a retaining strap keeps it seated on the hand. At 1.2 mm the panel adds almost no bulk between palm and bar, which keeps the bar feel close to bare-handed while still covering the skin that rips. Confirm the listing shows a live offer before ordering, since this grip’s availability has been intermittent in past listing checks.
Specs
- Format: No-hole panel with finger-loop or no-loop options
- Material: Proprietary isoprene polymer (IsoComp), 1.2 mm thick
- Chalk rule: No chalk — chalk reduces the polymer’s grip on the bar
- Wrist support: Retaining strap
- Size: Medium
- Sizing: Measure base of palm to base of middle finger; match the Element 26 size chart
Comparison
| Pick | Format | Material | Chalk | Size Listed |
|---|---|---|---|---|
| Bear KompleX Carbon 3-Hole | 3-hole | Carbon fiber | No chalk needed | Per brand chart |
| Bear KompleX Leather 2-Hole | 2-hole | Leather | Chalk OK | Per brand chart |
| WODFIT Carbon Fingerless | No-hole | Carbon fiber | No chalk needed | Small |
| JerkFit Raw Grips 3.0 | 2-finger | Leather | Chalk OK | Large |
| Element 26 IsoGrip | No-hole / loop options | Isoprene polymer | No chalk — chalk reduces hold | Medium |
If you want the most coverage, the 3-hole carbon pick leads. If you chalk and want the traditional feel, either leather pick fits. If you want the fastest on-and-off, the fingerless carbon pick wins. If you train where chalk is off the table, the IsoGrip is the specialist.
FAQ
Do karateka use gymnastics grips during karate training?
No. Kata and kumite are bare-handed, and no bar apparatus is part of karate technique training. Gymnastics grips belong to the conditioning side of the sport: pull-up bar and gymnastic rings sessions that build the grip strength and upper-body endurance supporting karate training. They protect your palms during bar work so hand tears do not cost you training days.
Should I choose 2-hole, 3-hole, or no-hole grips?
Choose by coverage and finger freedom. A 3-hole grip covers the most palm and suits long bar sets. A 2-hole grip leaves the index finger free for wrist mobility and easier transitions between movements. A no-hole grip is the fastest to put on and take off and suits mixed sessions. All three formats protect the same palm area; the difference is how much of your hand stays free.
Can I use chalk with carbon or isoprene grips?
No. Carbon fiber grips are made to hold a slick or powder-coated bar dry, and chalk does not help them. Isoprene polymer grips stick to the bar without chalk, and chalk actively reduces their hold. Chalk belongs with leather grips only. Using chalk on a carbon or isoprene grip at best does nothing and at worst weakens the grip you bought it for.
How do I size gymnastics grips correctly?
Measure from the base of your palm to the base of your middle finger, then match that number to the brand’s own size chart — never mix charts between brands, because every maker cuts differently. As an example, the JerkFit chart runs XS up to 3.75 inches, S from 3.75 to 4.25 inches, M from 4.25 to 5.0 inches, and L over 5.0 inches. If your measurement falls between sizes, size up for more palm coverage.
Conclusion
Gymnastics grips are a small accessory with a narrow job: keep your palms intact through the bar and ring conditioning that supports karate training. Pick the format that matches your sessions, match the chalk rule to the material, and measure your palm against the brand’s own chart before ordering.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!